Smart Tint recently completed a project for this University Hospital ICU.
They were kind enough to provide us with excellent installation and operating footage.
With every order placed, Smart Tint will provide engineering time to discuss logistics of installation. We will also provide helpful tips for you to follow in order to achieve a perfect installation like this one.
If you review the following video you will see the process from Start To Finish!
Please visit our how to install page for helpful installation tips.
*Watch how in the first clip the glass is being cleaned with a 99% Isopropyl Alcohol. Notice the AB-0000 Numbers on the film which is custom for each order. Use Smart Tint® provided cloth to dry your glass for a completely dry application.
*They then peel back 12" to 24" at a time of the protective liner as another person uses Smart Tint® provided hard card to stick material to glass and remove any air behind the film.
*After film is on the glass and the material has been wired, make sure you seal in edges with an Acid Free Silicone. Smart Tint® sells a smart Acid Free Silicone http://shop.smarttint.com/Smart-Tint-Neutral-Cure-Silicone-10oz_p_15719.html
*The video below shows Smart Cling® Self Adhesive Installed and Operating in this University Hospital in each of their ICU rooms. They use contact switches for power when opening and closing the doors.
Smart Tint® is an excellent choice for your hospital. Complete Privacy On Demand!
If you have any questions or you would like to speak to a representative please contact us (631) 656-9210