Measurements on this quote:
Sheet 1 = 1390 mm wide by 440 mm high
Pre-wiring of sheet 1 = all pre-wiring logistics and any other special requests will be discussed after full payment has been made.
Qty: Total square footage = 7
Smart Tint provides a simple and cost effective alternative to other Switchable Film technologies. It is manufactured with a self-adhesive cling layer on one side (peel and stick) which makes it easy to apply to both new and existing glass (no special installation equipment required).
A simple ON - OFF mode switches the film from being tinted grey to black. In its frosted grey state the film acts as an electronic blind providing privacy and security for any glass, window or partition.
Smart tint is available in 47 1/4" " x 120" and can be trimmed to size. Custom shapes and sizes are available pre-wired and ready to install. .
Smart Tint Film Specification
"Switchable film
"Power - 110VAC
"Frequency - 50/60Hz
"Current - 0.1 amperes per m2
"Power - 7 watts per m2
"Switching - less than 1 second in optimal conditions
"Operation - (on) light tinted grey (off) glossy black
"Thickness - 1.5 mm
"Light transmittance - On (85%) Off (8%)
"Haze Coefficient - On (5%) Off (93%)
Smart Tint Film Test Procedures
"Tested over 3 million switches
"High temperatures - >70 degrees C
"High temperature / humidity - >50 degrees C / 95% RH
"Cold temperatures - minus 20 degrees C (over 14 days)
"UV filtering - 99%
Smart Tint Features
"Self adhesive Smart Cling Technology film (peel and stick)
"Custom cut sizes and shapes" Circles , half moons, stars etc.
"Sheet sizes up to 244"
"Film widths 47.25"
"Simply apply to flat glass, plexiglass or hang like a curtain"
"Suitable for permanent or temporary applications
"UV / solar protection"
Smart Tint is Dimmable - You can manually adjust the level of tint with the appropriate controller.
The smart tint dimmer is a wall mountable dimmer system powerful enough to control 175 sq feet of smart tint. Includes all power supplies and wall radio dial switch
Dim your smart tint to any point you like.
Technical Data:
Control method: knob switch
Power: 300W
Rated power factor: > 90%
Current Range: 0 ~ 1.5A
Input Voltage: AC110 to 230V, 50 ~ 60 HZ
Output Voltage: Any point From 0 to 220VAC
Voltage control accuracy: 1/360
Overload capacity: 150% a minute
Operating temperature: - 10 degree to + 50 degree
Heat release method: forced cooling
Voltage protection: self re-set for over current and over heat
Size of regulator: 140 *110*53 mm
Net Weight: 1.2KG
